10 Lamination Problems in Flexible Packaging - Fixed
In this video we explain the 10 most common adhesive lamination problems in flexible packaging - from bubbles and low bond strength to tunnelling, curling and metal transfer - with their causes, solutions and quick checks.
Flexible Laminate Cost Calculator (FLCC) on GPN: https://app.globalpackagingnetwork.com
CHAPTERS
0:00 Intro
0:12 Also in Hindi
0:18 Sponsor these videos
0:26 How adhesive lamination works
0:50 The 10 problems
1:06 Problem 1: Bubbles and blisters
1:31 Problem 2: Low bond strength
1:56 Problem 3: Tunnelling
2:21 Problem 4: Curling
2:46 Problem 5: Wrinkles and creases
3:11 Problem 6: Odour and residual solvent
3:36 Problem 7: Poor appearance (mottling)
4:01 Problem 8: Ink lifting
4:26 Problem 9: High COF / slip problems
4:51 Problem 10: Metal transfer on MET film
5:16 Lamination checklist
5:38 Get help on GPN
5:54 Try it on GPN
6:08 Recap: 3 rules
6:26 Thank you
THE 10 PROBLEMS
1. Bubbles and blisters - nip temperature/pressure, moisture + isocyanate = CO2, coat weight
2. Low bond strength - corona treatment (38+ dyne), mix ratio, full cure, peel test (typical PET/PE 150-250 gf/15 mm)
3. Tunnelling - balanced web tensions, high green-tack adhesive
4. Curling - matched unwind tensions, chill roll, conditioning
5. Wrinkles and creases - roller alignment, spreader roller, film roll profile
6. Odour and residual solvent - dryer temperature and airflow, GC test (common limit 10 mg/m²)
7. Poor appearance (mottling) - clean anilox, viscosity, smoothing roller
8. Ink lifting - lamination-grade inks, full drying, tape test
9. High COF / slip problems - slip migration, cure temperature, COF after curing
10. Metal transfer on MET film - metal bond spec, MET-approved adhesive, fresh dry storage
Presented by Rajesh Modhvadia · Best viewed on a TV or big screen
Hindi version: (add link after the Hindi upload)
Previous video: ICC Profiles in Packaging Printing - https://youtu.be/-x9XrTg4EUc
Want to sponsor these videos? Contact +91 96500 47650
Note: Temperatures, coat weights and test values are typical figures for learning. Always follow your adhesive and film supplier's technical data sheet.
#LaminationProblems #FlexiblePackaging #PackagingIndustry

















































































































