What it does
A moulded component's price is decided by three things a quick estimate usually gets wrong. The clamp force the tool needs decides which press can run it. The yield — not just the scrap rate, but how many cavities are really running and how much of the shift the machine is producing — decides how many good parts an hour you sell. And the cavity count decides the trade-off between tool price and machine time, which is the decision that costs lakhs when it is wrong.
The Injection Moulding Cost Calculator works all three out from the part, the tool and your own rates, and resolves them into a price per piece and per 1,000 in eight lines: material, machine, energy, labour, tooling, secondary operations, packing, then overhead and margin.
How it works
- Open the module and choose New quote, then a cost model.
- Start from a typical part — a water or soft-drink closure, a flip-top, a disc-top, a pouch spout or a thin-wall tub — or enter your own.
- Describe the part: resin, weight, wall thickness, projected area and order quantity.
- Describe the tool: cavities, hot or cold runner, the toolmaker's mould base and per-cavity cost, and the tool life.
- Enter your cycle time, or let the calculator estimate it and show how.
- Read the cost, the checks and the cavity verdict below — they update as you type.
The checks on every quote
- Clamp force Shown on every result, from the resin's cavity pressure and the projected area of the cavities and the cold runner, with no safety factor added.
- Runner share A warning when the cold runner is more than 30% of the shot — small, high-cavitation parts can melt more runner than product.
- Cycle sanity Every cycle compared with published OEM cycles for closures, thin-wall cups and small parts, flagged when it is far off.
- Press and tool A warning when the press you plan to use is too small, and when no tool cost has been entered.
How many cavities does this order justify?
Below the cost, the calculator prices the same part at every cavity count from 1 to 128 and draws the curve, with your choice and the cheapest one marked. It then says it plainly — for example, “19 cavities would be cheaper than 48 — about ₹12,71,378 across this order” — and one tap switches the quote to the cheaper count.
What a cost model holds
- Machine The machine type, and a machine rate made of a fixed part plus an amount per tonne of clamp force — the shape real moulders' rates follow.
- Materials A price per kilogram for every resin you mould, masterbatch and its loading, and how much cold runner comes back as regrind.
- Energy and labour Your power tariff, operator cost and machines per operator.
- Yield Rejection, effective cavitation and OEE — three figures, because scrap is rarely the biggest loss.
- Commercial Packing per piece, factory overhead and margin.
Suppliers and admins author models from Manage cost models; a model is Public or Private, and can be shared with named customers by their Google sign-in email.
Saving, locking and sending
A saved quote gets its own Job Ref. Reopened later it re-prices at your current rates and says when the price has moved; locked, it keeps the price you sent. Each quote gives a quotation for the customer — the price only, never your costs — a costing sheet for you, and a message to paste into WhatsApp or email — or share a locked copy inside GPN, which your customer opens in their own account and can compare against other suppliers' quotes. Compare up to four saved quotes side by side, or bundle several for one customer into a single quotation.